As additional branches are added to a parallel circuit, total circuit amperage ________
A) Decreases B) Remains the same C) Increases D) None of these
C
You might also like to view...
Using moment distribution, construct the influence lines for the reaction at A and the shear and moment at section B (Figure P12.52). Evaluate influence line ordinates at 8-ft intervals in span AC and CD and at E.
The relationship between energy, work, and power can be stated as which of the following?
A) Power is measured in units of energy, and work is the transfer of power. B) Work is required to convert energy into power. C) Energy is the ability to do work, work is the result of transferring energy, and power is the rate at which the work is accomplished. D) Power is required to convert work into energy.
To avoid the use of paper to protect the surface of the chuck, what must be done to prepare a scaly heat-treated workpiece before grinding?
A) The heat treatment scale must be removed before chucking B) The workpiece must be annealed C) The workpiece must be tempered D) Remove the chuck and clamp directly to the table
The second most popular geometry for pneumatic robots
A) Jointed spherical geometry B) Cylindrical geometry C) Spherical geometry D) Cartesian geometry E) All of the above