Which tool is most often used to measure suspension component free play?
A) Micrometer B) Telescoping gauges
C) Dial indicator D) Vernier caliper
C
You might also like to view...
For burned out areas of ____________________ or larger, a piece of board stock or a similar board should be cut to fill in the cleaned-out area.
Fill in the blank(s) with the appropriate word(s).
A baffle that is designed to deflect high velocity fluids inside a heat exchanger.
a. longitudinal baffle b. horizontal baffles c. vertical baffles d. impingement baffles
MAF sensor electrical connectors should be checked for all of these, EXCEPT ________
A) Over-tight connectors B) Terminals bent or pushed out of the plastic connector C) Frayed wiring D) Corrosion
All animals brought into the United States must go through a _______ to check for diseases and parasites.
A. Resting cycle B. Pesticide spraying C. Quarantine period D. Deworming