Use the table of equivalents to convert 8.12 cubic inches to cubic centimeters. Round answer to the nearest thousandth as necessary.
What will be an ideal response?
133.065 cubic centimeters
You might also like to view...
The cantilever beam in Figure P14.2 is supported on a spring at joint B. The spring stiffness is 10 kips/in.
(a) Compute the stiffness coefficient associated with a 1-in. vertical displacement at joint B.
(b) Compute the vertical deflection of the spring produced by a vertical load of 15 kips.
(c) Determine all support reactions produced by the 15-kip load.
The solder most commonly used on low-pressure copper fittings is made from _____
A) 100% lead B) 50% tin/50% silver C) 95% tin/5% antimony D) 45% silver/25% zinc/30% copper
Because a water heater represents a continuous load, the branch circuit must be rated not less than ____ percent of the water heater nameplate rating.
Fill in the blank(s) with the appropriate word(s).
If the weld is to be deposited on the other side of the joint (far side), the weld symbol is placed ____ the reference line.
A. next to B. above and below C. below D. above