How are the connections between parts and subassemblies shown in exploded assemblies?
What will be an ideal response?
Centerlines are used in exploded views to show the connection between part and subassembly axes. Thin solid lines, called trails, are used to connect between non-cylindrical features, parts and subassemblies.
You might also like to view...
Technician A says that all current diesel CR fuel systems use a transfer pump. Technician B says that Caterpillar flange mount their transfer pump to the CR high pressure pump. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
If depth of fill is not indicated:
A) The hole is to be filled completely B) Fill to the lesser of the plate thicknesses C) It is up to the welder D) None of the above
The burner and pot of Problem 5.54 can be modeled as shown in Figure P5.55. R0 models the thermal loss between the burner and the pot. The pot is modeled by a thermal capacitance CP in parallel with a thermal resistance RP .
a. Find the final temperature of the water in the pot— that is, find V0 as t ?? if IS = 75 A, CP = 80 F, R0 = 0.8?, RP = 2.5?, and the burner is the same as in Problem 5.54.
b. How long will it take for the water to reach 80 percent of its final temperature?
Hint: Neglect CS since CS ? CP .
In a multiple axis position system, the ____________________ and ____________________ movements are horizontal and the ____________________ axis is vertical.
Fill in the blank(s) with the appropriate word(s).