Technician A states hydraulic lifters are suitable for camshaft designs where the lifter is not required to actuate the pump action of unit injectors. Technician B states hydraulic lifters are not suitable for OHC designs.
A. Technician A only.
B. Technician B only.
C. Both A and B.
D. Neither A nor B.
Answer: C
You might also like to view...
¿Cuál de las siguientes tareas suele realizarse con una grapadora eléctrica pero no con una clavadora eléctrica?
a. Colocación de revestimiento b. Colocación de tablas c. Instalación de tejas de techo interior d. Colocación de materiales de techado
When constructing ceiling systems, fire-rated and multilayer assemblies require the use of _____.
a. slip connectors b. wire ties c. lightweight studs d. welded joints
How is a temperature-pressure relief valve on a hot-water boiler tested?
A) Pull the lever and look for water at outlet of discharge pipe. B) Jump the high limit and operate the burners until the pressure relief valve opens. C) Pressurize the boiler with nitrogen until the pressure relief valve opens. D) Pressure relief valves are optional, so testing is not required.
A ____ receptacle is the most common receptacle type used in residential wiring.
a. single b. duplex c. triple d. quadruple