Plumbing systems began to be developed in the United States in the
A. 1850s
B. 1860s
C. 1870s
D. 1880s
Answer: A
You might also like to view...
The ____ detail(s) the type and grade of material to be used, including base metal, consumables such as filler metal, and hardware such as nuts and bolts.
A. project routing information B. bill of materials C. title box D. specifications
?What characteristic of some fluxes can help to push the weld penetration deeper?
A. ?The larger mass of some bigger electrode flux coverings add a great deal of weight to the slag covering that force the weld penetration deeper. B. ?Some fluxes act as a thermal blanket holding the heat into the weld which lets the weld penetrate deeper. C. ?The formation of a crucible at the end of the electrode that acts as a combustion chamber. D. ?The only way to get deeper weld penetration is to turn the welder's amperage to the maximum.
List three types of lines that are most widely used from the alphabet of lines.
What will be an ideal response?
What position should the front wheel be in during air bag module service?
A. Against the left lock B. Against the right lock C. Any position D. Straight ahead