Match each item with a statement below.
A. A set of design, construction, and maintenance techniques and practices that minimize a building's total environmental impact.
B. Provide alternatives with less environmental impact as compared to nonrenewable options.
C. The total energy required to manufacture or harvest, package, and ship a material to a job site.
D. Most new residential construction since World War II has been concentrated in suburban areas on previously undeveloped land.
E. Strictly evaluates the energy efficiency of a home and was not designed as a green building program.
F. Founded to develop a national market for home energy rating systems and energy-efficient mortgages.
A. Green building
B. Renewable energy sources
C. Embodied energy
D. Greenfield developments
E. ENERGY STAR
F. RESNET
You might also like to view...
Which of the following conduit bodies has a single cover opening on both sides?
a. Type LB b. Type LL c. Type LR d. Type LRL
If a parallel circuit has two resistors, R1 and R2, what is the total resistance?
a. 
b.
c. 
d. 
?Why does the return water on a water-cooled GTAW torch flow out around the power cable?
A. ?The electricity in the cable has to be protected from emitting RF from the high frequency starting voltage. B. ?To reduce the number of hoses to the torch. C. ?So a smaller power cable can be used. D. ?It helps to heat the water a little more to prevent algae and mold from growing.
To decrease the risk of hearing loss, exposure to noise should be limited to a maximum 8-hour, time-weighted average of 90 DBA.