A sectional view taken from the location of the section cutting plane and placed in any convenient location of the drawing, generally labeled in relation to the cutting plane.
A. Removed section
B. Revolved section
C. Aligned section
D. Offset section
E. none of the above
Answer: A
You might also like to view...
One advantage of DC electric braking is that _____.
a. it can be used to hold a suspended load b. solenoid-operated friction brakes are engaged c. the motor is stopped very gradually d. the motor can be stopped without having to use brake linings or drums
Technician A says following turbo use, turbo bearings cool quickly when the engine is shut off. Technician B says synthetic oil burns at a lower temperature so it is the oil of choice for use with a turbocharger. Who is right?
A. Technician A B. Technician B C. Both technicians D. Neither technician
A single-phase, half-wave SCR circuit is used to control the power consumption of an inductive load. The resistive component of the load is 5 ?. The source voltage is 120 V (rms). When the triggering angle is adjusted to 60o , the average current of the load is 6A. Calculate the following:
a. Average voltage across the load b. Conduction period in degrees
Technician A says that DOT 5 brake fluid can be added to DOT 3 brake fluid. Technician B says that it is wise to purchase brake fluid that is in metal rather than plastic containers. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician