A typical brake pedal position (BPP) sensor/switch is ________
A) Checked using an ammeter B) Electrically normally closed
C) Checked using a special tester D) Electrically normally open
D
You might also like to view...
If you are constructing a building where siding will be applied over the sheathing, you should use sheathing with a minimum thickness of _____.
a. 3/8" b. 1/2" c. 5/8" d. 1"
A technician is preparing to do an oil change on a hybrid vehicle. What special precaution needs to be taken BEFORE performing this service?
A) Disconnect any orange colored wiring harnesses B) Leave the hood closed when draining the oil C) Make sure the ignition is "OFF" and the key is removed from the ignition switch. D) Do not lift the vehicle more than 12 inches off the floor
On the main distribution frame (MDF), the subscriber termination from the outside plant is on the horizontal side and the switch is connected to the vertical side
Indicate whether the statement is true or false
Desiccant is placed in the receiver-drier or accumulator-drier ___________________
A) As this is the only place that it can be located B) To slow down refrigerant flow C) To absorb moisture from the system D) To trap excess oil in the system