How should the vacuum gauge and vacuum pump be connected to a four-port manifold?
A) The vacuum gauge is connected to the 1/4-in center port, and the vacuum pump is connected to the 3/8-in center pump.
B) The vacuum gauge is connected to the discharge service valve, and the vacuum pump is connected to the evaporator coil.
C) The vacuum gauge is connected to the 3/8-in center port, and the vacuum pump is connected to the 1/4-in center pump.
D) The vacuum gauge is connected to the evaporator coil, and the vacuum pump is connected to the discharge service valve.
A
You might also like to view...
Which compressor type has the motor separated from the compressor?
a. Open-drive compressor b. Scroll compressor c. Rotary compressor d. Hermetic compressor
The battery can be safely disconnected on a running engine, as long as it is not for more than 1 minute
Indicate whether the statement is true or false
The shape that results from passing a plane through a cone parallel to the base is a(n):
A. ellipse B. circle C. triangle D. parabola
Before opening the compressor crankcase to take an oil sample, you should:
A) Increase the crankcase pressure with nitrogen to at least 100 psig. B) Get the sample tube ready because the oil comes out very quickly under pressure. C) Valve off the compressor and recover the refrigerant down to 1 - 2 psig. D) Position yourself directly in front of the drain port.