Which of the following is true about a clamping diode?
A. It is used to protect some solid-state circuitry.
B. It cannot be tested with an ohmmeter.
C. It is not used on modern vehicles.
D. It cannot be tested with a self-powered test light.
Ans: A. It is used to protect some solid-state circuitry.
You might also like to view...
If theoretically perfect combustion takes place using a diesel fuel, what should result from the reaction?
A. nitrogen and oxygen B. water and carbon dioxide C. hydrocarbons and NOx D. particulate matter (PM) and carbon
All landscapes, regardless of size or theme, must first be designed on paper
Indicate whether the statement is true or false
Technician A says that if the opposite DTC can be set, the problem is the component itself. Technician B says that if the opposite DTC cannot be set, the problem is with the wiring or grounds. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
When selecting a point to tie off your own body harness, you should always choose an anchorage point that
is _____. a. at least 20' above where you will be working b. directly below your working position c. capable of supporting at least 5,000 pounds d. low enough to allow you to drop to the ground from the end of your lanyard