____________________ refers to a fit where there is space between the two mating parts.
Fill in the blank(s) with the appropriate word(s).
Clearance
You might also like to view...
The prosperity that developed in the 1920s
A. was accompanied by a foreboding cloud of consumer debt. B. led to a growing level of savings by the American public. C. enabled labor unions to gain strength. D. was based on a steady and moderate rate of healthy economic growth that did not rely on excessive consumer spending to sustain the prosperity during this decade. E. closed the gap between rich and poor.
Technician A says that tall safety stands can be used to provide additional support for a vehicle while on a hoist. Technician B says that most newer vehicles have a triangle symbol indicating the recommended hoisting lift points. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician
What is the pressure at the bottom of a water tank that has a cross section of 10 ft2 and is filled with water to a depth of 40 ft?
A) (40 ft × 10 ft2)/0.433 = 924 psi (rounded) B) 40 ft × 0.433 lb/ft = 17 psi (rounded) C) 40 ft × 0.433 lb/ft × 10 ft2 = 170 psi (rounded) D) (40 ft × 0.433 lb/ft)/10 ft2 = 1.7 psi (rounded)
Which of the following statements is true?
A. Unlike liquid mixtures, most solid mixtures can be modeled using the ideal solution model. B. The eutectic point is a three-phase equilibrium between two liquid phases and one solid phase. C. It is common for solid mixtures to possess immiscible solid phases. D. For solid-liquid equilibrium of a mixture, the liquidus is the curve that describes an all solid state in equilibrium with the first drop of liquid. E. None of the above are true.