An oblique groove is cut in a block as shown. Before the groove was cut, the top of the block was in the shape of a rectangle. Determine the area of the top after the groove is cut.
What will be an ideal response?
Area = length x width = 26 x (35 - 14) = 26 x 21 = 546 square mm
Trades & Technology
You might also like to view...
How does AutoCAD decide in which direction to draw a polyline arc?
What will be an ideal response?
Trades & Technology
Assuming that the load impedance is to be purely resistive, what load should be connected to terminals a-b of the circuits in Fig. 11.52 so that the maximum power is transferred to the load?
 FIGURE 1.png)
Trades & Technology
If input A of a NAND gate is connected to a clock and input B is HIGH, the normal output is
A) a clock signal. B) an inverted clock signal. C) HIGH. D) LOW.
Trades & Technology
In base line dimensioning, all measurements are made from common finished surfaces called base lines or ____ lines.
A. relative B. connection C. dimension D. reference
Trades & Technology