A technician replaced a 1157NA with a 1157A bulb. What is the most likely result?
A) The amber color of the bulb is a different shade
B) The bulb is brighter because the 1157A candlepower is higher
C) The bulb is dimmer because the 1157A candlepower is lower
D) Both B and C
A
You might also like to view...
A cable is made up of four wires. The breaking strength of each wire is a normally distributed random variable with mean 10 kN and standard deviation 1 kN. The strength of the cable, using the brittle wire method, is estimated to be the strength of the weakest wire multiplied by the number of wires.
a. Use simulated samples of size 1000 to estimate the mean strength of this type of cable. b. Estimate the median cable strength. c. Estimate the standard deviation of the cable strength. d. To be acceptable for a certain application, the probability that the cable breaks under a load of 28 kN must be less than 0.01. Does the cable appear to be acceptable? Explain.
Which of the following is the LEAST likely sensor to cause an electronic suspension fault?
A) Vehicle speed sensor B) Yaw sensor C) Throttle position sensor D) Steering wheel position sensor
How does air flow in a standing-pilot, natural-draft system?
A) It relies on heat to decrease the convection of the air to pull air into the combustion chamber and force flue-gases into the proper vent. B) It relies on a fan to pull the air into the combustion chamber and blow flue-gases out. C) It relies on heat to pull air into the combustion chamber and a fan to remove flue-gases. D) It relies on heat to increase the buoyancy of the air to pull air into the combustion chamber and force flue-gases into the proper vent.
Local notes ____ print.
A. are placed separately from the views of the B. relate to the entire C. are connected to specific features of the D. both b and c E. none of the above