What is the purpose of a liquid distributor?
What will be an ideal response?
A liquid distributor is used to evenly distribute the mixture of liquid and vapor refrigerant leaving the TEV to multiple circuits.
You might also like to view...
What would be a typical maximum intake restriction specification for a turbocharged diesel engine?
A. 15 inches H2O B. 15 inches Hg C. 25 inches H2O D. 25 inches Hg
Releases of refrigerant that result from connecting or disconnecting gauge hoses:
A) Are punishable under a special reduced-penalty provision for small infractions. B) Must be prevented by using special low-loss adapters. C) Are permissible under the EPA regulations. D) Must be prevented by recovering the refrigerant from the gauge hoses each time they are connected.
After servicing a system using bolt-on piercing valves, the technician should:
A) Remove the bolt-on valve and quickly braze up the hole. B) Recover the refrigerant, remove the bolt-on valve and replace it with a permanent valve. C) Close the bolt-on valve, remove the gauges, and put on the valve cap. D) Simply remove the gauges because most bolt-on valves are self-sealing.
500 mA is equal to ________
A) 0.0005 kA B) 500,000 ?A C) 0.5 Amps D) all of the above