When is the dielectric process used?
What will be an ideal response?
he dielectric process is used when the material to be heated is not an electrical conductor.
You might also like to view...
What are some examples of plant-derived pharmaceuticals?
What will be an ideal response?
The subcontractor and prime contractor enter into a relationship known as a ____________________
Fill in the blank(s) with correct word
Consider the building in Figure P2.22, which has a width into the page of 35 ft. Maximum inundation height, h max , and flow velocity, u max , have been determined as 33 ft and 20 ft/sec, respectively. Calculate the hydrodynamic load applied at floor level on the wall IJKL for Load Cases 2 and 3, due to outflow. If windows are inundated, calculate the expected hydrostatic loading on the adjacent outside walls due to water retained by the floor, or floors. Finally, calculate the debris impact load to be applied to the free-standing column CD. Assume I tsu = 1.0 and C d = 1.25.
When replacing an air conditioning component, all of the following are true about the refrigerant oil EXCEPT ________
A) The oil removed during refrigerant recovery should be measured B) The old oil should be drained from the component and measured C) The oil charge stamped on the compressor should be added to the system D) The old oil should be replaced with fresh oil