The framing member that touches the trimmer stud and the header is known as the _____
a) cripple stud
b) king stud
c) sill
d) common stud
b
You might also like to view...
Geometric characteristic symbols (or feature control symbols) include symbols for:
A. Hole size, circularity, and position B. Flatness, length, and parallelism C. Surface finish, position, and profile of a surface D. Angularity, circular runout, and cylindricity
If a tractor's hitch is to be used for towing a PTO-driven attachment, the ideal vertical distance between the PTO shaft and the hitch point should be _____
A) 18 inches B) 15 inches C) 8 inches D) 20 inches
If 1 inch equals 10 feet, the arrow on the engineer?s scale in the figure above indicates a length of _____
A) 5 feet
B) 6 inches
C) 50 feet
D) 1/2 inch
Which meter can measure current without having to make contact with uninsulated wires?
a. Clamp-on ammeter b. Ohmmeter c. Continuity tester d. Voltage tester