What might cause a gas flow that is too high in a compressor?
A. Loss of capacity
B. Suction-side restrictions
C. Onset of compressor surge conditions
D. Compressor operating at excessive rpm
A. Incorrect. Gas flow that is too high through the compressor may be caused by a compressor operating at excessive rpm, which could result in compressor damage.
B. Incorrect. Gas flow that is too high through the compressor may be caused by a compressor operating at excessive rpm, which could result in compressor damage.
C. Incorrect. Gas flow that is too high through the compressor may be caused by a compressor operating at excessive rpm, which could result in compressor damage.
D. Correct. Gas flow that is too high through the compressor may be caused by a compressor operating at excessive rpm, which could result in compressor damage.
You might also like to view...
The weld _____ is the junction between the edge of the weld and the base metal.? ?
A. toe? B. foot? C. groove? D. face?
The amount of space an individual animal normally uses in its daily activities is referred to as its home ____________________
Fill in the blank(s) with correct word
Which of the following statements is true?
A) Two white shirts of different sizes in the same inventory would be one SKU. B) Two items with the same part number in the same inventory would be one SKU. C) Two items with the same part number but in two different inventories would be one stock keeping unit (SKU). D) All of the above are true. E) None of the above is true.
When does the temperature differential initiate the defrost cycle?
A) When the air temperature drops below the coil temperature B) When the coil and air temperature difference increases for a prolonged period of time C) When the difference between the coil and outdoor air is constant D) When there is any frost on the coil