In general, efficiency is defined as
a. actual output divided by required input.
b. required input divided by actual output.
c. actual output multiplied by required input.
d. actual output minus required input.
a. actual output divided by required input.
You might also like to view...
Refer to the shaft shown in the accompanying figure. If B, C and D are 1/2, 5/8 and 1 7/32 inches respectively, what is the length of A?
What will be an ideal response?
A mass of 0.025 kg of steam at a quality of 10 percent and a pressure of 200 kPa is heated in a rigid container until the temperature reaches 300°C. The pressure at state 2 is nearest:
A) 2.25 MPa B) 2.5 MPa C) 2.75 MPa D) 3.0 MPa
Woring drawings are _________ plans for a building.
A. hand B. original C. design D. construction
The DSO sampling time is at least 20 times faster than other automotive testers.
Answer the following statement true (T) or false (F)