If any equipment problems are noted during the pre-shift inspection, the operator should _____.
a. use the equipment with caution until it can be sent in for service
b. perform a field repair to avoid holding up the schedule
c. make a note of it and proceed with operation
d. notify the supervisor or manager, then lock out and tag the equipment so that it cannot be used
d. notify the supervisor or manager, then lock out and tag the equipment so that it cannot be used
You might also like to view...
A substance called _____ is absorbed by noninfected cells where it inhibits the growth of viruses
a. Penicillin c. Interferon b. Amoxicillin d. Antigen
The swine data management system is known as the ____________________ System.
Fill in the blank(s) with the appropriate word(s).
The abbreviations TO and ____________________ are used with some control schematics to indicate a time-operated contact.
Fill in the blank(s) with the appropriate word(s).
The maximum allowable difference between the front and rear working angle of a drive shaft is ________,
A) 1/2 deg B) 1/4 deg C) 3 deg D) 1 deg