You would subtract the real parts and the imaginary parts separately to form what type of resulting number?
A. Radius vector
B. Angle combination
C. Complex
D. Polar
C
You might also like to view...
In a brick veneer assembly with a steel stud backup wall, the design of studs is generally governed by
A) the compressive strength of studs to withstand gravity loads. B) the deflection of studs to withstand lateral loads. C) the shortening of studs to withstand gravity loads. D) the bending strength of studs to withstand lateral loads. E) any one of the above, depending on the wall.
A series of ASME SA-193 carbon steel bolts are bolted to the upper surface of a metal plate. The bottom surface of the plate is subjected to a uniform heat flux of 5 kW/m2. The upper surface of the plate is exposed to ambient air with a temperature of 30°C and a convection heat transfer coefficient of 10 W/m2•K. The ASME Boiler and Pressure Vessel Code (ASME BPVC.IV-2015, HF-300) limits the maximum allowable use temperature to 260°C for the SA-193 bolts. Determine whether the use of these SA-193 bolts complies with the ASME code under these conditions. If the temperature of the bolts exceeds the maximum allowable use temperature of the ASME code, discuss a possible solution to lower the temperature of the bolts.
What will be an ideal response?
The landmark Civil Rights Act of 1964 accomplished all of the following EXCEPT
A. creation of the Equal Employment Opportunity Commission. B. prohibiting discrimination based on gender. C. banning sexual as well as racial discrimination. D. banning racial discrimination in most private facilities open to the public. E. requiring affirmative action against discrimination.
What is the function of a transducer?
A. Displays waveforms in the time domain B. Converts energy from one form to another C. Allows for spectrum analysis to be accomplished relatively easily in software D. Supplies test signal at the input of a circuit