In a bar list, stirrups are classified as _____

a. special bending bars
b. heavy bending bars
c. light bending bars
d. straight bars


c

Trades & Technology

You might also like to view...

____ exterior surfaces may be constructed using a finish coat of a Portland cement, lime, and sand mixture.

A. Glass-fiber B. Vinyl C. Stucco D. Aluminum

Trades & Technology

Identify the axiom or postulate that applies to the following statement.    If a = 35 in, b =12 in, and c = a + b then c = 47 in

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

A meter set to read ohms and connected to light bulb terminals reads "OL". This reading means the bulb is _______

A) Bad B) Is reading what it should (good) C) Bulb filament is electrically open D) Both A and C

Trades & Technology

A "dry park" test to determine the condition of the steering components and joints should be performed with the vehicle _________

A) On level ground or on a drive-on lift B) On turn plates that allow the front wheels to move C) Lifted off the ground about 2 inches D) On a frame contact lift with the wheels off the ground

Trades & Technology