What does the instruction, MOV P1, A do?
A) moves corrected Hex to DAC display B) moves corrected BCD to ADC display
C) moves corrected Hex to ADC display D) moves corrected BCD to DAC display
D
You might also like to view...
Slabs that must meet superflat specifications are finished with _____.
a. board screeds b. vibratory truss screeds c. vibratory manual screeds d. metal floats
At least one of the receptacles of a patient bed location must be connected to (1) the normal system branch circuit as required or (2) a critical branch circuit supplied by ____ not associated with other receptacles at the same patient bed location.
A. a dedicated feeder service B. a separate branch circuit C. the same transfer switch D. a different transfer switch
A DTC (Diagnostic Trouble Code) P0301 (misfire on cylinder 1 ) on a waste spark system could be caused by all of these, EXCEPT ________
A) Open spark plug wire on cylinder 4 (companion to cylinder 1 ) B) Defective #1 spark plug C) Open plug wire on cylinder 1 D) Defective Pick-up coil
The part of the ratchet-lever hoist that is used to let out the chain without using the ratchet handle is the
_____. a. suspension hood b. fast wind handle c. ratchet release d. chain stop