To ensure priming, the pump should be installed so that the pump suction is lower than the tower basin's:
A) Air-inlet fan. B) Cold-water level. C) Deck material. D) Inlet valve.
B
You might also like to view...
Which of the following is a true statement regarding fabric duct systems?
a. The material cost of a fabric duct system is typically 10 percent more than an equal sheet metal duct system. b. Fabric duct materials require special cleaning processes using low-pressure steam. c. Most fabric duct systems are located outside of the conditioned space. d. Porous versions of duct material stay cleaner since dust cannot easily settle on the duct.
While having a discussion, Technician A says that a rear main bearing seal leak is indicated when there is oil on the transmission side of the torque converter. Technician B says that a rear main bearing seal leak is indicated when there is oil on the engine side of the flywheel or torque converter. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Does each radiator control the temperature of the water flowing through it?
What will be an ideal response?
All employees who are exposed to hazardous conditions such as falling objects, electrical hazards, or burns are required to wear ___________________________________ on the job site.
Fill in the blank(s) with the appropriate word(s).