All automatic transmission fluid levels are checked with the engine running
Indicate whether the statement is true or false
FALSE
You might also like to view...
A 1.5-foot wrench is used to tighten a bolt. If 30 pounds of force are applied to the end of the wrench, how much torque is generated?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. The triac, like the SCR, must be phase shifted if complete control is to be gained over the AC voltage applied to it. 2. The UJT is an AC operated device. 3. The UJT can be used to supply the trigger pulses for the triac that needs both negative and positive pulses. 4. The capacitor cannot charge until the triac turns off at the end of the half cycle of alternating current. 5. The charge time of the capacitor is determined by the size of capacitor and the amount of resistance connected in series with it.
How do OSHA’s monthly inspection requirements compare to their requirements for a shift inspection?
a. The monthly inspection requires removal and inspection of the wire rope. b. The monthly inspection has the same inspection points but it must be documented. c. The monthly inspection includes many items not checked during the shift inspections. d. The monthly inspections are only required if the crane operated more than 250 hours.
Technician A says a short piece of fuel hose should be placed over the rod bolts to protect the crankshaft during removal and installation. Technician B says you should wear clean latex gloves before handling engine bearings. Who is correct?
A. Technician A B. Technician B C. Both technicians D. Neither technician