List three techniques used by manufacturers to balance the drive shaft and reduce the effects of vibrations and the resulting noises.
What will be an ideal response?
Techniques used by manufacturers to balance the drive shaft and reduce the effects of vibrations and the resulting noise include:
1) Welding balance weights to the outside diameter of the drive shaft
2) Inserting cardboard liners into the tube, which serve to decrease the shaft's vibration by damping the vibration
3) Placing biscuits (rubber inserts) between the drive shaft and the cardboard liner to reduce noise transfer within the drive shaft
4) Using a tube-in-tube design, in which the input driving yoke has an input shaft that fits inside the hollow drive shaft
5) Using drive shafts made with aluminum tubing or fiber composites
You might also like to view...
Breed character is shown in the _____
a. feet of the animal c. legs of the animal b. body of the animal d. head and general appearance
The job of the USDA is to _____
a. inspect meats only c. inspect all food products b. inspect produce only d. none of the above
When the project has separate electrical drawings, the electrical installer must coordinate these designated outlet locations between the electrical and architectural drawings.
Answer the following statement true (T) or false (F)
In the accompanying figure, when the START button is pressed, current flows through ____________________ coil.
Fill in the blank(s) with the appropriate word(s).