Which factor of palatability first influences expectations of quality?
a. Aroma c. Appearance
b. Flavor d. Tenderness
C
You might also like to view...
This problem concerns a compound which, in the vapor phase, is described by the equation of state:
PV = RT + (BP3) Where B = 0.005 L mol-1atm-2 In the liquid phase, the molar volume is constant at 0.150 L/mol. The vapor pressure can be modeled using the Antoine equation, with A=7.500, B=1400, C=225, temperature expressed in Celsius and pressure expressed in mm Hg. A) Derive an algebraic expression for the fugacity of the compound in the vapor phase, as a function of temperature and pressure. B) Use the Antoine equation to estimate the vapor pressure at 200 ?C. C) Estimate the fugacity of the compound in the liquid phase at 200 ?C and 100 atm.
Which of the following statements is NOT true about the Firewire Serial Communication?
A) An implementation of IEEE 1394 serial bus standard. B) The ability to chain devices together in a number of different ways without terminators. C) A single plug-and-socket connection on which up to 63 devices can be attached. D) It has a lower data transfer rate than the Universal Serial Bus (USB).
In Figure 14-1, the primary to secondary turns ratio is 1:3 and the secondary current equals 120 mA. What is the primary current?
A) 360 mA B) 180 mA C) 40 mA D) cannot compute because the voltage is not given
What level of DBA is considered the maximum limit of continuous exposure over eight hour days without protection?