Find the perimeter and acreage of the field shown in Figure 3-8. (Note: 10 sq ch = 1 acre.)
scale drawing
You might also like to view...
All of the following statements are true EXCEPT:
A. drive axles usually support the weight of the vehicle. B. it is important that tires be the same size on all limited slip differentials. C. a bearing retainer is installed on the axle before the bearing is pressed on to provide a means of bolting the assembly to the brake backing plate. D. semi-floating bearings are found on trucks.
Technician A says that federal law requires all new vehicles to be equipped with collapsible steering columns. Technician B says that a hammer should be used to install a steering wheel onto the steering shaft. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Running full loads and using the ____ setting allows for the most efficient operation of dishwashers.
A. no-dry B. normal heat-dry C. no-heat dry D. extra-heat dry
Which of the following is the recommended procedure when plastic filler is part of the repair scenario?
A. Etching the metal prior to applying plastic filler B. Spraying self-etch primer onto the surface prior to applying plastic filler C. Applying an anti-corrosion compound prior to applying plastic filler D. Cleaning the metal and applying filler directly over it