?What process can be combined with a laser beam to apply a surface cladding on a part?
A. ?SAW
B. ?FCAW
C. ?SMAW
D. ?GMAW
Answer: D
You might also like to view...
?Define the termwelding.
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1.A receptacle for a gas-fired range is permitted to be connected to a small appliance circuit in a kitchen. 2.A receptacle located under a kitchen sink for a cord-and-plug-connected garbage disposal must be GFCI protected. 3.In a laundry room, receptacles must be placed so that no point along the wall is more than 6? from a receptacle. 4.The receptacle installed for a clothes washing machine located in a laundry area of an unfinished basement or a bathroom must be GFCI protected. 5.If a new electric clothes dryer is being installed in a home built before 1996 that has a three-wire cord-and-plug connection, the circuit must be replaced to accept a four-wire cord and plug.
Technician A says that an Audi five-valve engine uses three intake valves and two exhaust valves. Technician B says that it uses three exhaust valves and two intake valves. Which technician is correct?
A) Technician A only B) Technician B only C) Both technician A and technician B D) Neither technician A nor technician B
If the frequency output of a MAF is plotted on a graph along with engine RPM the resulting lines should be ________
A) A parabola B) A straight line C) A sharp curve D) In opposite directions