When a clutch is released ________.
A) The pressure plate springs are compressed
B) The release bearing is pushing against the spring fingers
C) Both A and B
D) Neither A nor B
C) Both A and B
You might also like to view...
An initially evacuated tank is to be filled with O2 gas from a supply line which contains O2 at 1000 kPa and 25oC. The tank volume is 0.25 m3, and the tank is to be filled until the pressure inside the tank is 900 kPa. Determine the amount of heat transfer required if the temperature of the O2 in the tank is to be 40oC.
State i: Inlet (Supply Line); State 1: Initial State; State 2: Final State Given: O2; Ti = 25oC; Pi = 1000 kPa; V = 0.25 m3; P2 = 900 kPa; T2 = 40oC Assume: P1 = 0; m1 = 0 (initially evacuated). Also, as no information is given and these terms are unlikely to be significant, W = 0, and kinetic and potential energy can be neglected. No flow out of the tank. O2 is an ideal gas with variable specific heats. What will be an ideal response?
Without using a calculator, which function is greater, csc 39.88° or csc 74.56°?
Fill in the blank(s) with the appropriate word(s).
The space behind the piston ring is called ________
A) Side clearance B) Back clearance C) Forward clearance D) Piston ring clearance
A chain fall locks its elevated load in place using _____
a. an automatic brake b. the chain c. a pin inserted through the chain links d. a padlock