In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, what are two other methods by which the module’s IP address can be configured?
What will be an ideal response?
In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, the module’s IP address can also be configured using RSLogix 5000 or RSLinx software.
You might also like to view...
What does the following command do?
Router(config)# ipv6 route 2001:0db8:BEEF::/32 FA1/0 a. This is the IPv6 command for configuring a RIP route. b. This is the IPv6 command for configuring an OSPF route. c. This is the IPv6 command for configuring a static route. d. This is the IPv6 command for configuring an EIGRP route.
On a traditional IBM mainframe, the signal that flashes from a channel to the processor is called a(n) __________.
a. exception b. CSW c. CAW d. interrupt
The Start button appears on the ____ toolbar.
A. Build B. Standard C. Compilation D. Program
The part of the CPU that carries out arithmetic and logical operations is called the ALU.
a. true b. false