As reverse bias increases, the depletion region between the N-channel and the P-type material attached to the gate terminal also increases.It is called the gate-to-source ____ voltage.
a. saturation
b. cutoff
c. depletion
d. junction
b. cutoff
Trades & Technology
You might also like to view...
In dip coating, the most common plastics used is ____. ?
A. ?polyethylene B. ?polyvinyl chloride C. ?polypropylene D. ?polyester
Trades & Technology
In the thread specification 3/4 - 14 NPT, 3/4 represents _____
a. 3 to 4 threads per inch b. the expected makeup length c. the nominal pipe size d. the length of the threaded portion of the pipe
Trades & Technology
A pneumatic drill is commonly used _____
a. in areas where noise is a problem b. to supply compressed air to de-burr pipes c. when there is no source of electricity d. for intricate detail wor
Trades & Technology
The __________ control mode is used to overcome overshoot.
A. rate B. reset
Trades & Technology