Technician A says the first step in checking transmission electrical controls is to verify system voltage. Technician B says when no DTCs are present then diagnose the transmission based on its symptoms. Who is correct?

A. A only
B. B only
C. Both A and B
D. Neither A nor B


Answer: C

Trades & Technology

You might also like to view...

To sketch a circle, the same process for sketching an arc is repeated for all ____ of the circle.

A. halves B. sections C. portions D. quarters

Trades & Technology

Describe an effective website

What will be an ideal response?

Trades & Technology

The overload contacts on a motor starter are normally open and interrupt current when an overload condition is detected

Indicate whether the statement is true or false

Trades & Technology

Compressed gas tanks often have gage pressures of at least 1 MPa. Suppose you wished to use a manometer to measure the gage pressure of a compressed air tank whose pressure was at least 1 MPa. The manometer would be set up between the tank and the atmosphere. What is the minimum length of tube needed for such a measurement if the liquid in the manometer is (a) mercury (? = 13,500 kg/m3), (b) water (? = 1,000 kg/m3), and (c) engine oil (? = 880 kg/m3)? Do these seem to be practical devices for such a measurement?

Given: Pg = 1 MPa = 1,000,000 Pa Assume: g = 9.81 m/s2 What will be an ideal response?

Trades & Technology