Draft is the slope allowance on all vertical surfaces of a pattern, which is necessary to facilitate the removal of the pattern from the mold.
Answer the following statement true (T) or false (F)
False
You might also like to view...
When checking the refrigerant charge for an operating system with a fixed metering device, the focus should be on _____.
a. subcooling b. superheat c. saturation temperature d. condensation temperature
Nine inches of topsoil should be spread evenly over the surface, and the ground should be tilled to loosen and break up the soil
Indicate whether the statement is true or false
When a packing material is covered with graphite, it is said to be ____.
A. lubricated B. graphited C. sealed D. indestructible
The distance from a point on one gear tooth to a corresponding point on the adjacent tooth measured on the circumference of the pitch diameter is the ____.
A. diametral pitch B. circular thickness C. chordal thickness D. circular pitch