How can you control hammer-off-dolly straightening?
What will be an ideal response?
You can control hammer-off-dolly straightening by:
| - | Altering how hard you hit the panel. Start out with light blows and then increase their force as needed to lower high spots in the panel. |
| - | Changing how hard to push the dolly against the back of the panel. Pushing harder tends to increase lifting action to raise low spots. |
| - | Adjusting how far away the dolly is from the hammer blows. Moving the dolly further away tends to spread out the lowering-raising force to a larger area on the panel. Moving the dolly next to the hammer blow tends to concentrate the effect of the lowering/raising force. |
Trades & Technology
You might also like to view...
A horse cannot sleep standing up because they are not capable of locking their knees and hocks.
Answer the following statement true (T) or false (F)
Trades & Technology
Slag is a good ____________________
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
The opportunity cost of an action is:
A. The value of the forgone alternative action B. Commensurate with the amount of time the action will take C. The EA value of that action D. Not worth considering
Trades & Technology
Determine (a) the absolute maximum values of shear and moment in the beam produced by the wheel loads and (b) the maximum value of moment when the middle wheel is positioned at the center of the beam in Figure P12.43.
Trades & Technology