Technician A says that the purpose of SAI is to provide an upper suspension pivot location that causes the spindle to travel in an arc when turning. Technician B says that RWD vehicles typically have a greater SAI angle than FWD vehicles. Which technician is correct?

A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B


A

Trades & Technology

You might also like to view...

Rod, pipe, and plate electrodes must have a resistance to ground of at least ___

a. 25 ohms or less b. 35 ohms or less c. 45 ohms or less d. 75 ohms or less

Trades & Technology

In the 2G ____, the pipe is vertical and the weld is horizontal.

A. horizontal rolled pipe position B. vertical reversed pipe position C. horizontal fixed pipe position D. vertical fixed pipe position

Trades & Technology

Technician A says that 6 point socket is more likely than a 12 point socket to round off a fastener head. Technician B says that a 12 point socket is more likely than a 6 point socket to round off a fastener head. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology

Technician A says that spin balancing is an effective method of balancing axle ends. Technician B says that using an internal balancing agent (IBA) is an effective and cost-effective means of balancing wheel ends. Who is correct?

A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B

Trades & Technology