?The filler passes should be stopped when the surface is approximately ____________ below the pipe's outer surface.
A. ?1/32 in. to 3/32 in. (0.8 mm to 2.4 mm)
B. ?1/16 in. to 1/8 in. (1.6 mm to 3 mm)
C. ?1/32 in. to 3/32 in. (0.8 mm to 2.4 mm)
D. ?3/64 in. to 1/8 in. (1.2 mm to 3 mm)
Answer: B
You might also like to view...
If you stack two each of these steel bars, what is the height of the stack, in inches?
Reduce all fractions to their simplest forms. Convert all improper fractions to mixed numbers. Provide answers in the following format:
Fraction: 3/4
Mixed number: 1 5/8
Which is NOT an acceptable method of disposing used tires?
A) Shred for use in asphalt B) Burn in cement kiln C) Landfill D) Retread
One of a supervisor’s two basic responsibilities when managing project documents is _____.
a. knowing acronyms and terms used in each document type b. selecting documentation specialists to assist in the process c. finding the most cost-effective way of reducing paper flow d. carrying out the company policies affecting documentation
The American National Standards Institute (ANSI) has a standard set of symbols used to identify all of the necessary types of ____________________.
Fill in the blank(s) with the appropriate word(s).