How would you prepare the crankshaft for installation?
What will be an ideal response?
1. Remove the old crankshaft sprocket and install the new one. Crank sprockets slide easily into place on some engines, but are pressed-fit on others.
2. Make certain that the woodruff key is perfectly flat in its groove in the crank. An improperly installed woodruff key can cause a cracked sprocket.
3. If the crank is already in the block, the sprocket can be heated for easier installation.
4. Install the sprocket with the timing mark facing outward. The inside edge of the sprocket has a chamfer that corresponds to the fillet on the crank; if the sprocket is backward, it cannot be installed all the way.
You might also like to view...
List the types of lead terminations normally used for making repairs.
What will be an ideal response?
To be successful, set __________ and make specific plans to achieve each one.
Fill in the blank(s) with the appropriate word(s).
Because the armature of a DC motor is wound in much the same way as a DC generator, the current from the supply must divide and flow through three or more paths.
Answer the following statement true (T) or false (F)
Output, as described in the System View Model, could be described as ______
Fill in the blank(s) with correct word