Describe what a longitudinal engine is, what type of drive system is employed, and how these engines are usually removed.
What will be an ideal response?
Longitudinal engines are usually installed into (RWD) rear-wheel drive vehicles.This is where the front of the engine faces the front of the vehicle. When removing engines of this type, it is usually required that the engine be removed from the top side of the car through the hood.
You might also like to view...
In a potential transformer, the voltage across the secondary terminals is always _____.
a. higher than the primary voltage b. lower than the primary voltage c. higher than the source voltage d. equal to the primary voltage
____ are a snapshot of the conditions when a fault occurred.
A. Systemic data B. Secondary data C. Environmental data D. Ancillary data
The serial communication interface ________
A) Is either built into the processor module or come as separate modules B) Distributes the network control capability across a large automation system C) Includes a microprocessor so that it can be programmed for network data exchange D) Is a single plug-and-socket connection with a high data transfer speed
A ____ bearing is usually a sleeve or bushing that may support radial and axial loads.
A. standard B. plain C. roller D. ball