Los cortafuegos se utilizan _____.
a. en unidades de manejo de aire
b. para bajar la temperatura
c. para detener el flujo de aire en caso de un incendio
d. sólo en conductos de alta presión
c. para detener el flujo de aire en caso de un incendio
You might also like to view...
____________________ provides the owner third-party certification and attempts to create documentation that validates the original assumptions and green design aspects of the original design.
Fill in the blank(s) with the appropriate word(s).
Total added sweetener consumption has increased by 25 percent since the 1970s
Indicate whether the statement is true or false
The dimensions of an enclosed gabled building are shown in Figure P2.13a. The external pressures for the wind load perpendicular to the ridge of the building are shown in Figure P2.13b. Note that the wind pressure can act toward or away from the windward roof surface. For the particular building dimensions given, the C p value for the roof based on the ASCE standard can be determined from Table P2.13, where plus and minus signs signify pressures acting toward and away from the surfaces, respectively. Where two values of C p are listed, this indicates that the windward roof slope is subjected to either positive or negative pressures, and the roof structure should be designed for both loading conditions. The ASCE standard permits linear interpolation for the value of the inclined angle of
roof ?. But interpolation should only be carried out between values of the same sign. Establish the wind pressures on the building when positive pressure acts on the windward roof. Use the following data: basic wind speed = 100 mi/h, wind exposure category = B, K d = 0.85, K zt = 1.0, G = 0.85, and C p = 0.8 for windward wall and –0.2 for leeward wall.
Please explain your understanding of the term "Progressive Discipline"
What will be an ideal response?