Where is the normal separation point between the material that is removed with each cycle and the material that is in the machine and used in the next cycle?
What will be an ideal response?
The dividing line is where the heated resin is cooled. When the resin is cold, it will naturally separate from the hot, molten resin at the sprue bushing. The nozzle is heated and so the resin within the nozzle is hot. The mold is cooled and so the material inside the mold, all the way back to the sprue, is cold. The sprue bushing is the normal separation point.
You might also like to view...
The disease-causing microorganisms that have both RNA and DNA but lack true cell walls are called _________________________ organisms
Fill in the blank(s) with correct word
Two good ways a HDET will prevent personal injury is to:
a. use safety glasses and two point contact b. use work boots and issue a work plan c. do everything that a senior HDET does and work quickly d. Minimize risks and use PPE properly
A capacitor can be used in what components?
A) A radio B) A speaker C) A microphone D) All of the above
There are many more resistance values available for ten percent tolerance resistors than for one percent tolerance resistors.
Answer the following statement true (T) or false (F)