What is the possible error for a gauge that has 1% of full-scale accuracy if the gauge reads up to 300 psig?
A) Plus or minus 3 psi B) Plus or minus 1 psi
C) Plus or minus 6 psi D) Plus or minus 2 psi
A
You might also like to view...
A common substance used in pickling food is _____
A) vinegar B) alcohol C) olive oil D) water
When pressure testing a hydraulic assisted power steering system, the highest pressures were greater than within 50 psi of each other. This indicates a problem with ________
A) The flow control valve B) A defective hose C) The pump vanes D) The pump rotor
What could be the problem if a noid light remains on (does not flash) with the engine cranking?
A) Short to ground in the injector ground circuit, or defective PCM. B) High injector resistance. C) Blown injector fuse. D) Low system voltage.
If a 1,000 ml container has 68.5 percent solids, 17.3 percent solvents, and 12.3 percent binder, what is the percentage of additives?
What will be an ideal response?