The proper term for Channel Locks is ________.

A) Vise Grips
B) Multigroove adjustable pliers
C) Crescent wrench
D) Locking pliers


B) Multigroove adjustable pliers

Trades & Technology

You might also like to view...

The first step in developing the farm plan is to know the farm's ____

A) owners B) location C) address D) features

Trades & Technology

Technician A says that the voltage drop between the output terminal of the alternator and the positive terminal of the battery should be less than 0.4 volt. Technician B says that the voltage drop between the case of the alternator and the negative terminal of the battery should be less than 0.2 volt. Which technician is correct?

A) A only B) B only C) Both A and B D) Neither A nor B

Trades & Technology

What determines the injectors nozzle opening pressure (NOP) in a hydraulic injector?

A. It is a soft value controlled by the PCM. B. Injector spring tension. C. Injector actuators. D. Fuel pressure.

Trades & Technology

Stairs are shown on floor plans by:

A. the width of the tread B. the direction and number of risers C. the lengths of handrails or guardrails D. DN for down, UP for up, and R for risers E. all of the above

Trades & Technology