8. What type of tubing connection is commonly used with both metal and plastic tubing?
A. Flared fitting
B. Flanged fitting
C. Quick connect
D. Compression fitting
A. Incorrect. A flared fitting is used for copper or aluminum tubing.
B. Incorrect. A flanged fitting is not a type of tubing connection.
C. Incorrect. A quick connect is commonly used with plastic tubing or plastic piping.
D. Correct. A compression fitting is commonly used with both metal and plastic tubing.
You might also like to view...
PROBLEM 2.34 For the composite block shown in Prob. 2.33, determine (a) the value of h if the portion of the load carried by the aluminum plates is half the portion of the load carried by the brass core, (b) the total load if the stress in the brass is 80 MPa. PROBLEM 2.33. An axial centric force of magnitude P ? 450 kN is applied to the composite block shown by means of a rigid end plate. Knowing that h ? 10 mm, determine the normal stress in (a) the brass core, (b) the aluminum plates.
Swales and collection basins are part of a(n) _____.
a. containment control program b. asbestos abatement plan c. hazardous waste manifest d. erosion and sediment control plan
In an AC circuit, where the source voltage is 120V, the line current is 10A, and the power factor is 60%, the actual power is ____________________ watts
Fill in the blank(s) with the appropriate word(s).
What is the minimum lapping required for floor joists over a beam or support?
A) 12" B) 3" C) 6" D) 18"