During an antemortem inspection animals that are down, diseased, disabled, or dead are condemned as unsafe for human consumption

Indicate whether the statement is true or false


T

Trades & Technology

You might also like to view...

What do wiring diagrams show?

What will be an ideal response?

Trades & Technology

HC and CO are high and CO2 and O2 are low. This could be caused by a ________

A) Defective ignition component B) Rich mixture C) Clogged EGR passage D) Lean mixture

Trades & Technology

Why is a library of piping symbols important when drawing with CAD?

What will be an ideal response?

Trades & Technology

Which of the statements below best describes the basic operation of a dual-slope A/D converter?

A) A ramp voltage and analog input voltage are applied to a comparator. As the input voltage causes the integrating capacitor to charge, it will at some point equal the ramp voltage. The ramp voltage is measured and displayed on the digital panel meter. B) A ramp generator is used to enable a counter through a comparator. When the ramp voltage equals the input voltage the counter is latched and then reset. The counter reading is proportional to the input voltage since the ramp is changing at a constant V/second rate. C) Two ramps are generated: one by the input voltage and the other by a reference voltage. The input voltage ramp charges the integrating capacitor, while the reference voltage discharges the capacitor and enables the counter until the capacitor is discharged, at which time the counter value is loaded into the output latches. D) The input voltage is used to set the frequency of a voltage-controlled oscillator (VCO). The VCO quits changing frequency when the input voltage stabilizes. The frequency of the VCO, which is proportional to the analog input voltage, is measured and is displayed on the digital display as a voltage reading.

Trades & Technology