In order to measure voltage
A) you must first break the current path
B) you must connect the meter in series with the component
C) you must connect the meter in parallel with the component
D) you must install the meter in the current path
C
You might also like to view...
Certain tasks are performed by the engine control module (ECM) in order to ensure that the exhaust emissions are within 1.5 times the Federal Test Procedure (FTP) limits. The ECM can perform all of these actions except ________.
Fill in the blank(s) with correct word.
Category __________ cable is the preferred UTP cable for residential voice and data applications.
a. 3 b. 5 c. 5e d. 6
For heavy stock removal a ________ drill should be used
A) Jobber B) step drill C) core D) roughing
What is the purpose of the detector?
A. To recover the low-frequency intelligence or baseband signal from the much higher intermediate- or radio-frequency carrier. B. To remove any residual amplitude modulation and the amplitude variations resulting from noise. C. To make an economical LC oscillator at 100 MHz with sufficient frequency stability. D. To recreate the carrier.