To obtain an ampere reading, you should clamp the jaws of the meter around two wires.

Answer the following statement true (T) or false (F)


False

Rationale: Never clamp the jaws of the meter around two wires to obtain an ampere reading.

Trades & Technology

You might also like to view...

Most modern antivirus/anti-malware utilities cannot detect rootkits.

Answer the following statement true (T) or false (F)

Trades & Technology

If governing regulations require extension ladders to be set at such an angle that the distance from the top support to the foot of the ladder is approximately one fourth of the working length of the ladder, how many inches should the base of a ladder with a 12 1/4-foot working length be from the scaffold end frame?

What will be an ideal response?

Trades & Technology

Technician Asays glazed or worn linings are the most common cause of drum brake problems. Technician B says suchproblems include hard pedal, pulling to one side, wheel locking, brake chatter, excessive pedal travel, noisy brakes, grabbing brakes, or little or no braking power. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

After aluminum coupons and backings have been properly cleaned and prepared, they should be welded

within _____. a. 1 hour b. 45 minutes c. 30 minutes d. 10 minutes

Trades & Technology