Assembly prints are basically the same thing as detail prints.
Answer the following statement true (T) or false (F)
False
You might also like to view...
A guy wire making a 25°? angle with a vertical pole makes a 65°? angle with the flat ground.
Answer the following statement true (T) or false (F)
Answer the following statement(s) true (T) or false (F)
1. The four basic math functions can be used with constant values or values stored in a storage register, holding register, input/output registers, or any other accessible word. 2. The math function cannot be used with timer and/or counter values. 3. When the Compute (CPT) instruction first appears on the screen during programming, the source must be specified first. 4. The only way to learn how to apply the arithmetic functions on a given PLC is to read the manufacturer’s literature and work with that PLC. 5. The only difference between the basic math instructions for the Logix5000 controllers and prior controllers is that the Logix5000 controllers use tag based addressing.
All fuel oil piping should slope back to the tanks at least _____ inch per foot.
a. 1/16 b. 1/8 c. 1/4 d. 1/2
For an electrical device to operate, it must have ________
A) Power and a ground B) A ground and a fusible link C) A relay to transfer the current to the device D) A switch and a fuse