What is the special purpose served by special-purpose interceptors?
What will be an ideal response?
They collect very specific materials, sometimes in order to reclaim them, such as
precious-metal collectors.
You might also like to view...
Follow the steps of the Systematic Approach of Section 14.4—that is, (1) identify the system, (2) determine whether the process is batch or rate, (3) construct a schematic diagram with inputs and outputs, (4) Label known material quantities or rates of flow and so on. Two liquids, A and B, are mixed together. A is 3.0 percent solids, the remainder water. B is 8.0 percent solids, the remainder water. An amount S of pure, dry solids is mixed with A and B to form 2.0(102) kg of a mixture with 5.0 percent solids. Develop a table of combinations of amounts of A, B, and S that will satisfy the final mixture requirements. What is the maximum amount of B that can be used to meet the requirements without having to remove pure, dry solids from the mixture? Hint: Write a short computer program
or use a spreadsheet and start with B = 0 and increase in increments of 2 kg. What will be an ideal response?
A line voltage overload has ten or more terminals to check.
Answer the following statement true (T) or false (F)
A(n) ________________ is a large land area in which water is absorbed from rain or melting snow and from which water drains as it emerges from springs
Fill in the blank(s) with the appropriate word(s).Technician A says that before removing the engine, the battery should be disconnected. Technician B says to assist in reassembly, you should mark all unfamiliar hoses and wires in the engine compartment. Which technician is correct?
A) Technician A B) Technician B C) Both technicians D) Neither technician