An npn BJT has the following values meausred: Vc = 8.3 V, Ve = 1.1 V and Vcc = 18 V. The value of Vce must be
A) 9.4 V
B) 27.4 V
C) Cannot be deternined, it depends on the value of ?.
D) 8.6 V
D
You might also like to view...
Which of these components lets the PCM (Powertrain Control Module) know how fast you want to accelerate?
A) Throttle Position (TP) Sensor B) O2S (Oxygen Sensor) C) Idle air control valve D) CKP (Crankshaft Position) Sensor
Kirchhoff?s current law states that
A) the total current entering a given junction is constant, even with changes in supply voltage. B) the sum of the currents entering a junction must equal the sum of the currents leaving the junction. C) the sum of the currents entering a junction must equal zero. D) the sum of the currents around a closed loop is zero.
Taper taps generally have lead in chamfers equal to or greater than ____ pitches.
A. 3 B. 10 C. 5 D. 2
If oil is not returning to the compressor, a possible cause is _____
A) poorly designed refrigerant piping B) oil viscosity C) incorrect refrigerant type D) that the oil is too miscible